Sound only in one speaker

Use this forum for questions related to graphics, sound or desktop environments.

Sound only in one speaker

Postby stille » January 19th, 2017, 8:08 pm

Speakers work fine when plugged in other devices

Code: Select all
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC889A Analog [ALC889A Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC889A Digital [ALC889A Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


Code: Select all
$ lspci -v | grep -A7 -i "audio"
lspci: Unable to load libkmod resources: error -12
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
   Subsystem: Gigabyte Technology Co., Ltd GA-MA770-DS3rev2.0 Motherboard
   Flags: bus master, slow devsel, latency 32, IRQ 16, NUMA node 0
   Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge
--
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM]
   Subsystem: PC Partner Limited / Sapphire Technology Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM]
   Flags: bus master, fast devsel, latency 0, IRQ 31, NUMA node 0
   Memory at fdefc000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: snd_hda_intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
   Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet


http://www.alsa-project.org/db/?f=18fc1 ... e2b0ca90ef alsa information

Pavucontrol sees a single volume bar for output devices, and profile is set to Analog Stereo Duplex
stille
 
Posts: 1
Joined: January 19th, 2017, 7:52 pm

Return to Desktop & Multimedia

Who is online

Users browsing this forum: No registered users and 2 guests

cron

x